7
Ceiling Mount
If you wish to install the projector on the ceiling:
• We strongly recommend using InFocus approved ceiling mounts for
proper fitting, ventilation and installation. Refer to the installation
guide that comes with the InFocus Ceiling Mount Kit (p/n SP-CEIL-
UNIV) for more information. The warranty does not cover any dam-
age caused by use of non-approved ceiling m
ount kits or by installing
in an improper location.
• The ceiling must be strong enough to support the projector and the
installation must be in accordance with any local building codes. Con-
sult your dealer for more information.
• Maximum supported physical pitch is +/-8º.
• Maximum supported physical horizontal roll is +/-8º.
• Keep all adjacent surfaces 3” (76mm)
from si
des, front and rear and
.87” (22mm) from the bottom of projector to preserve required airflow
around the projector.
To Next Page
Loading...
