InFocus LP130 User Manual

15
Reset (keypad only)
Resets the options in the menus (except Language, Video Stan-
dard, and Rear Projection) to their original settings.
Keystone + - (remote only)
Use this feature to adjust the image vertically and make a squarer
image.
1
Press the
keystone +
button to reduce the upper part of the
image, and press the
keystone -
button to reduce the lower
part. You can also adjust keystone from the Display menu (see
page 17 for details on the menu).
FIGURE 12
Adjusting the keystone
Forward/back buttons (remote only)
These buttons act like the page up and page down buttons on
your computer’s keyboard. You can use them to advance through
a slide show in PowerPoint™ presentations. To use this feature,
you must connect the USB mouse connector on the computer
cable to your computer. See page 7 for details.
Up/down arrow buttons
Use these buttons to navigate through and make adjustments to
the on-screen menus. See “Using the On-Screen Menus” on
page 16 for details.
increasing keystone
decreasing keystone

InFocus LP130 Specifications

Projection Distances and Image Sizes

projection distance 5 feet	1.52 m
min image size at 5 feet	0.90 m
max image size at 5 feet	1.10 m
projection distance 8 feet	2.44 m
min image size at 8 feet	1.44 m
max image size at 8 feet	1.76 m
projection distance 12 feet	3.66 m
min image size at 12 feet	2.16 m
max image size at 12 feet	2.63 m
projection distance 16 feet	4.88 m
min image size at 16 feet	2.88 m
max image size at 16 feet	3.51 m
projection distance 20 feet	6.10 m
min image size at 20 feet	3.60 m
max image size at 20 feet	4.39 m
projection distance 30 feet	9.14 m
min image size at 30 feet	5.39 m
max image size at 30 feet	6.58 m

Display and Image

display technology	DLP from Texas Instruments
native resolution	1024 x 768
brightness	1100 ANSI lumens
contrast ratio	400:1 full on full off
aspect ratio	4:3
displayable color palette	16.7 million colors

Lens and Projection

projection lens zoom ratio	1.22:1
projection ratio wide	0.72:1
projection ratio narrow	0.59:1
projection offset	111.3% typical
digital keystone correction	+/- 20˚

Power and Consumption

light source	120 Watt UHP+
lamp life	2000 hours
power supply	100-120V, 200-240V at 50Hz-60 Hz
power consumption	150 Watts

Weight and Dimensions

dimensions	6.68" x 8.63" x 2.0" (170mm x 219mm x 51mm)
weight	3 lbs (1.36 kg)
operational noise	37dB