InFocus LP130 User Manual

25
Status Menu
This is a read-only menu for informational purposes. To display
the Status menu, highlight Status from the Main menu, then press
menu/select
.
FIGURE 20
Status menu
Lamp hours used
Indicates how many hours the current lamp has been in use. The
counter starts at zero hours and counts each hour the lamp is in
use. Replace the bulb when the brightness is no longer accept-
able. See “Replacing the Projection Lamp” on page 27 for details.
Computer resolution
Shows your computer’s resolution setting. To change this, go to
your computer’s Control Panel and adjust the resolution in the
Display tab. See your computer’s user’s guide for details.
Source
Indicates the active source, Data-Analog, Data-Digital, Compos-
ite video, or S-video.
Ver s i on
Indicates the projector’s software version. This information is
useful when contacting Technical Support.

InFocus LP130 Specifications

Projection Distances and Image Sizes

projection distance 5 feet	1.52 m
min image size at 5 feet	0.90 m
max image size at 5 feet	1.10 m
projection distance 8 feet	2.44 m
min image size at 8 feet	1.44 m
max image size at 8 feet	1.76 m
projection distance 12 feet	3.66 m
min image size at 12 feet	2.16 m
max image size at 12 feet	2.63 m
projection distance 16 feet	4.88 m
min image size at 16 feet	2.88 m
max image size at 16 feet	3.51 m
projection distance 20 feet	6.10 m
min image size at 20 feet	3.60 m
max image size at 20 feet	4.39 m
projection distance 30 feet	9.14 m
min image size at 30 feet	5.39 m
max image size at 30 feet	6.58 m

Display and Image

display technology	DLP from Texas Instruments
native resolution	1024 x 768
brightness	1100 ANSI lumens
contrast ratio	400:1 full on full off
aspect ratio	4:3
displayable color palette	16.7 million colors

Lens and Projection

projection lens zoom ratio	1.22:1
projection ratio wide	0.72:1
projection ratio narrow	0.59:1
projection offset	111.3% typical
digital keystone correction	+/- 20˚

Power and Consumption

light source	120 Watt UHP+
lamp life	2000 hours
power supply	100-120V, 200-240V at 50Hz-60 Hz
power consumption	150 Watts

Weight and Dimensions

dimensions	6.68" x 8.63" x 2.0" (170mm x 219mm x 51mm)
weight	3 lbs (1.36 kg)
operational noise	37dB