44
Projector Manager Software
Status menu
F
IGURE
32
Status menu
Lamp Hours Used
Indicates how many hours the current lamp has been in use. The
counter starts at zero hours and counts each hour the lamp is in
use. Replace the bulb when the brightness is no longer accept-
able. See “Replacing the Projection Lamp” on page 45 for details.
Source Resolution
Shows your computer’s resolution setting. To change this, go to
your computer’s Control Panel and adjust the resolution in the
Display tab. See your computer’s user’s guide for details.
Current Source
Indicates the active source, Data-Analog, Data-Digital, Compos-
ite Video and S-Video.
Projector Software Version
Indicates the projector’s software version. This information is
useful when contacting Technical Support.
To Next Page
Loading...
