43
Auto Source Select
When this feature is Off, the projector defaults to the source
selected in Default Source. To display another source, you must
manually select one by pressing the
source
button on the keypad
or the
data
or
video
button on the remote, or by using the Source
option in Projector Manager. When this feature is On, the projec-
tor automatically finds the active source, checking the default
source first. Click the check box to turn this feature on and off.
Display Messages
When this feature is On, status messages appear in the lower-
right corner of the screen. Click the check box to turn this feature
off and not see status messages.
Display Startup Screen
When this feature is On, the InFocus startup screen appears when
the projector starts up and remains until an active source is
detected. The startup screen contains information on contacting
InFocus. Click the check box to turn this feature off and display a
plain black, blue, or white screen instead of the startup screen.
To Next Page
Loading...
