InFocus X17 User Manual

Connection 15
Connecting Video source devices
You can connect your projector to various Video source devices that provide any
one of the following output sockets:
• Component Video
• S-Video
• Video (composite)
You need only connect the projector to a Video source device using just one of the
above connecting methods, however each provides a different level of video
quality. The method you choose will most likely depend upon the availability of
matching terminals on both the projector and the Video source device as described
below:
Best video quality
The best available video connection method is Component Video (not to be
confused with composite Video). Digital TV tuner and DVD players output
Component Video natively, so if available on your devices, this should be your
connection method of choice in preference to (composite) Video.
See "Connecting a Component Video source device" on page 16 for how to
connect the projector to a component video device.
Better video quality
The S-Video method provides a better quality analog video than standard
composite Video. If you have both composite Video and S-Video output terminals
on your Video source device, you should elect to use the S-Video option.
See "Connecting an S-Video source device" on page 17 for how to connect the
projector to an S-Video device.
Least video quality
Composite Video is an analog video and will result in a perfectly acceptable, but
less than optimal result from your projector, being the least video quality of the
available methods described here.
See "Connecting a composite Video source device" on page 18 for how to connect
the projector to a composite Video device.
Connecting audio
The projector has one built-in mono speaker which is designed to provide basic
audio functionality accompanying data presentations for business purposes only.
They are not designed for, nor intended for stereo audio reproduction use as might
be expected in home theater or home cinema applications. Any stereo audio input
(if provided), is mixed into a common mono audio output through the projector
speaker.

InFocus X17 Specifications

General

Matrix size	0.55 \
Projection distance	1.49/6 m
Vertical scan range	56 - 85 Hz
Horizontal scan range	31.35 - 68.7 kHz
Projection technology	DLP
Contrast ratio (typical)	2000:1
Screen size compatibility	0.69 - 6.4 \
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	-30/30 °
Aspect ratio	4:3, 5:4, 16:9
RS-232 ports	1
Dimensions (WxDxH)	223.5 x 263.9 x 111.8 mm
Power requirements	100 - 240 V, 50 - 60 Hz
Throw ratio	1.9 - 2.1:1
Lamp power	140 W
Light source type	Lamp
Service life of light source (economic mode)	4000 h
Analog signal format system	NTSC, PAL, SECAM
RMS rated power	5 W
Serial interface type	RS-232
Noise level	29 dB
Power consumption (typical)	285 W
Operating temperature (T-T)	5 - 35 °C
Placement	Ceiling

Weight and Dimensions

Weight	2400 g