INFOSEC UPS SYSTEM E4 Evolution II TT Series - Page 130

129
INFOSEC UPS SYSTEM – 15, Rue du Moulin – 44880 Sautron – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 02 19 AA 59 203 07
Step 4
Single input model:
Switch OFF the Input1 Breaker (Q1) as
shown below.
Dual input model :
Switch OFF the Input1 Breaker (Q1) and
Input2 Breaker (Q2) as shown below.
Single input model:
Switch OFF the Input1 Breaker (Q1) as shown
below.
Dual input model :
Switch OFF the Input1 Breaker (Q1), Input2
Breaker (Q2) and Output Breaker (Q3) as
shown below.
Step 5
It is possible to change the power stage/module now.
6-3-2. Transfer to UPS Protection
Step 1
Make sure the maintenance is complete. All power stages/modules have been
installed well.
Step 2
Single input model:
Switch ON the Input1 Breaker (Q1) as
shown below.
Single input model:
Switch ON the Input1 Breaker (Q1) as
shown below.