900021971 R11 000 06/0818
Copyright© 2018
Ingenico
All rights reserved
4_
Installation
4_1
Positioning the terminal
Install the terminal on
a
flat surface, with
an
easy
access
to
an
electrical
outlet. Place the terminal
away
from any
heat
source
and
protected
from dust, vibrations and electromagnetic radiations (away from video
terminals,
PC,
anti-shoplifting barriers
...).
The terminal is exclusively
made
for indoor use.
The Lane/5000 device may be mounted on a flat surface, wall, or
customer stand.
CAUTION
Do not place the Lane/5000 device on a PC monitor, adjacent
to an electronically active security tag deactivation system,
or near other sources of magnetic fields.
The Lane/5000 device must be at least 30 centimeters (12 inches)
away from an electronically active type of security tag deactivation
pad.
An electronically active system sends out a powerful and
potentially disruptive signal to deactivate the security tag. If
the Lane/5000 device
is
placed too close to the system’s pad, or
placed above the pad, the product may not work properly.
A passive system
is
a permanent magnet type that does not send
out a signal.
This
type should not affect the Lane/5000 device.
Operating conditions
Ambient temperature
from 0°C to +45°C
Max relative humidity
85% RH non-condensing at +40°C
Max altitude
2000 m
Storage conditions
Storage temperature
-20°C, +55°C
Max relative humidity
85% at +55°C
To Next Page
Loading...
