900021971 R11 000 06/0818
Copyright© 2018
Ingenico
All rights reserved
5_
Daily use
5_1 Card reading
5_1_1 Swiping a card
Insert the card manually in the reader,
magnetic stripe facing the main body of
the terminal, and slide the card from the
rear to the front in a continuous motion for
best results.
When sliding the card through the reader,
make sure that the magnetic stripe on the
card
is
facing the Lane/5000 display screen
(see Swiping a Magnetic Stripe Card).
Swipe the card with constant speed, neither too slowly nor
too fast, to maximize the reading efficiency
5_1_2 Inserting a smart card
C
h
i
p
c
a
r
d
s
s
h
o
u
l
d
b
e
i
n
s
e
r
t
ed
i
n
t
o
y
o
u
r
terminal as illustrated with the chip facing
up and into the card reader.
5_1_3 Reading a contactless card
Bring the card to the active zone above the
contactless logo (at about 1cm).
Keep the card close to the contactless logo
during the transaction.
To Next Page
Loading...
