900021971 R11 000 06/0818
Copyright© 2018
Ingenico
All rights reserved
Your contactless reader provides four contactless status lights located
above the contactless logo.
When a contactless transaction
is
started
the
first
(left hand) status light
will
be
lit
steadily;
this
indicates that the contactless
is in
use but a card
is
not being read.
When a contactless card
is
presented
to the contactless active zone during a
transaction the second, third and fourth
status lights
will
be
lit
in turn. The card
read
is
successful when all four status lights
are
lit
and a confirmation tone can be
heard.
CAUTION
Contactless
status lights
Do not stick any label onto the contactless active zone. It
can decrease contactless efficiency.
CAUTION
Avoid metallic parts around the contactless area.
5_2
Keyboard details and
functionality
The red key cancels the procedure
in progress
The yellow key
cancels the last
character
The green key validates input
selections and information.
It is also used to switch on the
terminal
To Next Page
Loading...
