-95- -96-
BTS-3
TERMINAL #'S VOLTAGE CONDITION
3,4 +5VDC CONTACT OPEN
3,4 0VDC CONTACT CLOSED
5,6 +5VDC CONTACT OPEN
5,6 0VDC CONTACT CLOSED
7,8 +5VDC CONTACT OPEN
7,8 0VDC CONTACT CLOSED
J1 LOW VOLTAGE DC (0,5,10 VDC) POWER ON
0 VDC POWER OFF
ELECTRO-STATIC DISCHARGE
FIELD SERVICE KIT
CCN 39198619
Static electricity built up by our ordinary everyday movement can be
dissipated to any object we touch or handle during the day. Electronic
devices, such as those found on Ingersoll-Rand compressors, can be
damaged by this electricity. Even though the part will function properly for
a while, the component life can be dramatically shortened.
An Electro-Static Discharge (ESD) kit has been developed to eliminate the
risk of transmitting electricity to electronic components. Ingersoll-Rand
recommends using the kit everytime Intellisys components (EPROMS,
option proms, interface boards, etc.) are handled.
The ESD kit is now available through Ingersoll-Rand Air Compressor Parts.
INGERSOLL-RAND TECHNICAL SERVICES
To Next Page
Loading...
Need help?
General
