10 Programming the SmartLink-GP
Programming manual
3.3.1 General information
SmartLeague is the configuring software of the entire INIM electronics
product spectrum. You can configure numerous devices/systems on your
office service computer, regardless of the type of device/system.
You can configure a device on your service computer, then write the data to
the device EEPROM when you get to the customer's premises.
You can work on several parameter groups ('solutions') at the same time, for
example, you can copy a device/system configuration and download it to
another device/system of the same type. Each solution has its own
configuration file:
If you wish to create a 'solution', you must first select the device type and
model:
The start page of the SmartLeague software is connected to the INIM Web
providers, if you are connected to internet, it will show all the updated
information regarding software and firmware upgrades, revised manuals,
instruction inserts and newsletters, etc.
To Next Page
Loading...