28 Programming the SmartLink-GP
Programming manual
Input - Line termination
Enabled when SmartLink-GP is used as an
Intrusion control panel.
See paragraph 3.8
Programming the
SmartLink-GP as an
Intrusion control panel.
Input - 24h
Enabled when SmartLink-GP is used as an
Intrusion control panel.
See paragraph 3.8
Programming the
SmartLink-GP as an
Intrusion control panel.
Input - Threshold 1
The value of the balance resistor which
determines the transition threshold from
status 1 to status 2, and triggers the
status 2 event.
Input - Threshold 2
The value of the balance resistor which
determines the transition threshold from
status 2 to status 3, and triggers the
status 3 event.
Input - Threshold 3
The value of the balance resistor which
determines the transition threshold from
status 3 to status 4, and triggers the
status 4 event.
Para-
meter
Description Note
To Next Page
Loading...