Programming the SmartLink-GP 45
Programming manual
number functions (see paragraph 3.9 Associating incoming and outgoing
calls with actions).
3.12.2 Sending several commands in one SMS text
message
Several commands can be included in the same message (maximum 70
characters). A space will separate one command from the other.
Example
<User Code> <OutputDescription_x> ON <OutputDescription_y> OFF
STATUS
Example
“0001 CourtesyLights ON GardenSprinkler OFF STATUS”
If a feedback reply is required, the message will read: "CourtesyLights OK
GardenSprinkler OK”
3.12.3 Change user code
CODE <User Code> <NewUserCode>
Example
“CODE 0001 000123”
Note: For security reasons, the respective SMS message will be
deleted automatically from the SIM card after acquisition.
This command allows the user to change the user code at any time.
3.12.4 Arm/Disarm panel
• Arming the panel
SYSTEM ON
• Disarming the panel
SYSTEM OFF
• Password protected arming operations
<UserCode> SYSTEM ON
• Password protected disarming operations
<UserCode> SYSTEM OFF
Example
“0001 SYSTEM ON”
Note: The panel will send a 4 second (approx.) feedback ring to
the caller as confirmation of the performed arm operation,
or an 8 second (approx.) feedback ring as confirmation of
the performed disarm operation.
To Next Page
Loading...