50 Programming the SmartLink-GP
Programming manual
Note: Refer to paragraph 3.7 Programming the Inputs and
Outputs — IN&OUT for the parameter descriptions.
3.13.4 Programming an event
SL EV <EventNum> <VoiceNum>,<SMSNum>,
<VoiceMsg>,<SMSmsg>,<OUT_ON>,<OUT_OFF>,
<PSTNConstraint>,<GSMConstraint>,<ClearCallQueue>
Example
“SL EV33 0000000001,0000000010,00010100,2,00100,00010,0,0,0”
Note: The programming fields (e.g.: 00000001) refer to the
position of the element in the software interface (e.g.:
1000000000 is telephone number 1, 0000000001 is
telephone number 10). An event programmed via SIM has
the Store event option enabled at all times.
Refer to paragraph 3.10 Programming event generated
actions for the parameter descriptions
LED 0=output
1=output with LED feature
Feedback 0=None
1=SMS
2=Rings
3=SMS+ring
Parameter Description
EventNum From 1 to 46
VoiceNum Programming field to enable/disable the 10 voice-
message telephone numbers
SMSNum Programming field to enable/disable the 10 SMS-
message telephone numbers.
VoiceMsg Programming field to enable/disable the eight
voice messages.
SMSmsg SMS Message
OUT_ON Programming field to enable the five outputs.
OUT_OFF Programming field to disable the five outputs.
Parameter Description
To Next Page
Loading...