Inhibit events for output control 61
Programming manual
Appendix D
Inhibit events for output control
(via DTMF, SMS or recognized caller)
If an output in the Events table has been associated with one of the
following events, it can be activated/deactivated only by another event and
not by DTMF tones, SMS text or recognized caller.
• Start dialler calls
•Low battery
• Call queue full
•Disarm
• Called failed on land line (PSTN)
• Called failed on GSM network
• Dialer calls ended
•Arm
•No GSM Service
• Land line down (PSTN)
•Power-on
• Low battery restored
• PSTN line restored
• No GSM Service restored
• Emergency calls only restored
• Emergency calls only
To Next Page
Loading...