INNO VIEW 5 - Battery Precautions

Chapter 1 Technical Specications 10
Battery precautions
•
DO NOT collide the battery with sharp or hard objects.
•
DO NOT transport or store the battery with metals simultaneously.
•
DO NOT throw, drop, impact or bend the battery.
•
DO NOT strike the battery with hammers or tread on it.
•
DO NOT connect the anode and cathode of the battery to metals such as
electrical short circuit.
•
DO NOT let the anode and cathode contact with the external aluminum coating
of the battery so as to avoid short circuit.
•
DO NOT disassemble the battery under any circumstances.
•
DO NOT immerse the battery in fresh water or sea water, and avoid moisture.
•
DO NOT use or place the battery near heat source. (e.g. re, heat oven)
•
DO NOT heat the battery or throw it into water.
•
DO NOT weld the battery directly.
•
DO NOT charge the battery near re or in high temperature.
•
DO NOT put the battery into the microwave oven or high pressure container.
•
DO NOT use or place the battery in extremely high temperature
(e.g. strong sunlight or inside a car which is with poor ventilation) for long period
of time. Otherwise, it may cause overheat, re, battery malfunction, or shorter
battery life.
•
DO NOT use damaged battery. The battery with electrolyte leakage or electrolyte
smell shall be kept away from re to avoid re or explosion.
•
If electrolyte leakage contacts with skin or other parts of body, please wash it off
with a plenty of water immediately. If electrolyte leakage contacts with your
eye(s), please rinse your eye(s) with water immediately and seek medical advice.