INNO VIEW 5 - Chapter 6: Heater Mode; Selecting Heater Mode

32
Heater Mode
The splicer provides 32 heat modes including 6 heat modes preset by
INNO Instrument and the rest that can be dened by users. Select a heating mode
that best matches with the protection sleeve used. For each type of protection
sleeve, VIEW 5 has its optimum heating mode. These modes can be found in the
database area for reference. Copy the appropriate mode and paste it to the
user–programmable area. Users can edit those parameters.
Selecting heater mode
Select [Select Heat Mode] in [Heater Mode] menu.
6
Select [Heater Mode] menu.
Select [Select Heat Mode].