Inovance AC700 Series - Network Port Overview

Wiring
-26-
Model
No.
Network ports
Function
AC702
1 LAN A
Programming port (used for downloading and
monitoring)
2 LAN B
Modbus/TCP communication port (which does not
support communication with InoProshop)
3 LAN C
EtherCAT master port
AC703
1 LAN A
Programming port (used for downloading and
monitoring)
2 LAN B
Modbus/TCP communication port (which does not
support communication with InoProshop)
3 LAN C
EtherCAT master port
4.4.2 Ethernet Connection
With the Ethernet port, the controller can be connected point-to-point with devices such as a
computer and HMI through an Ethernet cable, as shown in the following figure.
Figure 4-5 Connection between the controller and PC
The controller can also be connected to a hub or switch, which is further connected with other
network devices, through an Ethernet cable to achieve multi-point connection.