Safety Precautions
● Require repair services according to the product warranty agreement.
● When the fuse is blown or the circuit breaker or earth leakage current breaker (ELCB) trips, wait for
at least the time specified on the product warning label before power-on or further operations.
Failure to comply may result in equipment damage, physical injury, or even death.
● When the equipment fails or is damaged, designate qualified technicians to troubleshoot and repair
the equipment in accordance with the maintenance instructions and keep a maintenance record.
● Replace quick-wear parts of the equipment according to the replacement guide.
● Do not use a damaged machine. Failure to comply may result in worse damages, physical injury, or
even death.
● Make sure to re-check the wiring and parameter setting after device replacement.
Disposal
● Scrap the equipment or product in accordance with relevant national regulations and standards.
Failure to comply may result in property damage, physical injury, or even death.
● Recycle retired equipment by observing industry waste disposal standards to avoid environmental
pollution.
Safety Signs
For safety operations, follow the safety signs on the equipment. Do not stain or remove the safety
signs. The safety signs are described as follows:
Safety Sign Description
● Read through the safety instructions before operating the equipment. Failure to
comply may result in equipment damage, physical injury, or even death.
● Do not touch terminals or remove the cover during power-on or within 10
minutes after power-off. Failure to comply may result in an electric shock.
-6-
To Next Page
Loading...
