Safety Instructions
- 4 -
◆
Do not install the equipment if you nd damage, rust, or indications of use on the equipment
or accessories.
◆
Do not install the equipment if you nd water seepage, component missing or damage upon
unpacking.
◆
Do not install the equipment if you nd the packing list does not conform to the equipment
you received.
Storage and Transportation
◆
Store and transport this equipment based on the storage and transportation requirements for
humidity and temperature.
◆
Avoid transporting the equipment in environments such as water splashing, rain, direct
sunlight, strong electric eld, strong magnetic eld, and strong vibration.
◆
Avoid storing this equipment for more than three months. Long-term storage requires stricter
protection and necessary inspections.
◆
Pack the equipment strictly before transportation. Use a sealed box for long-distance
transportation.
◆
Never transport this equipment with other equipment or materials that may harm or have
negative impacts on this equipment.
◆
Use professional loading and unloading equipment to carry large-scale or heavy equipment.
◆
When carrying this equipment with bare hands, hold the equipment casing rmly with care to
prevent parts falling. Failure to comply may result in personal injuries.
◆
Handle the equipment with care during transportation and mind your step to prevent personal
injuries or equipment damage.
◆
Never stand or stay below the equipment when the equipment is lifted by hoisting equipment.
Installation
◆
Thoroughly read the safety instructions and user guide before installation.
◆
Do not modify this equipment.
◆
Do not loosen xed bolts (especially those marked in red) on equipment components.
◆
Do not install this equipment in places with strong electric or magnetic elds.
◆
When this equipment is installed in a cabinet or nal equipment, protection measures such as
a reproof enclosure, electrical enclosure, or mechanical enclosure must be provided. The IP
rating must meet IEC standards and local laws and regulations.