Inovance CS200 - User Manual

User Guide
CS200 AC Drive
Specialized for Cranes
CS200 AC Drive User Guide
Copyright Shenzhen Inovance Technology Co., Ltd.
Shenzhen Inovance Technology Co., Ltd.
Add.: Building E, Hongwei Industry Park, Liuxian Road, Baocheng No. 70 Zone, Bao’an District, Shenzhen
Tel: +86-755-2979 9595
Fax: +86-755-2961 9897
Service Hotline: 400-777-1260
http: //www.inovance.com
Suzhou Inovance Technology Co., Ltd.
Add.: No. 16 Youxiang Road, Yuexi Town, Wuzhong District, Suzhou 215104, P.R. China
Tel: +86-512-6637 6666
Fax: +86-512-6285 6720
Service Hotline: 400-777-1260
http: //www.inovance.com
A00
Data code 19010899
User Guide

Inovance CS200 Specifications

General

Brand	Inovance
Model	CS200
Category	DC Drives
Language	English

Summary

Preface

Introduction to the CS200 Drive

Provides an overview of the CS200 AC drive and the manual's purpose.

Chapter 1 Safety Information and Precautions

Safety Information

Crucial safety warnings and precautions for installation and operation.

General Precautions

Essential operational recommendations and installation guidelines.

Chapter 2 Product Information

Product Type Identification

Explains model designation rules and nameplate details for the CS200.

Components of the CS200

Details the physical parts and housing types of the CS200 AC drive.

Technical Specifications

Lists standard functions, performance, and operational capabilities.

Connection to Peripheral Devices

Illustrates system configuration and describes peripheral devices for the CS200.

Chapter 3 Mechanical and Electrical Installation

Mechanical Installation

Covers installation environment, mounting clearances, and methods.

Electrical Installation

Details wiring of main circuit terminals and control circuits.

Chapter 4 Operations and Application Examples

Operation Panel Introduction

Explains the function, indicators, and keys of the operation panel.

Viewing and Modifying Function Codes

Describes the procedure for navigating and changing parameters on the operation panel.

Starting and Stopping the AC Drive

Covers command sources, start modes, and stop modes for drive operation.

Use of Input;Output Terminals

Explains the function and configuration of DI, DO, AI, and AO terminals.

Brake Time Sequence and Motor Auto-tuning

Details crane brake control sequence and motor parameter auto-tuning.

Application Example for Construction Elevator

Provides a wiring example for controlling a construction elevator with the CS200.

Chapter 5 Function Code Table

Level-I Menu Parameters (Group A)

Lists standard and auxiliary parameters for the Level-I menu.

Level-II Menu Parameters (Group b, E*, U)

Details parameters for motor control, I/O, and basic functions.

Level-III Menu Parameters (Group F)

Covers motor parameters and control optimization settings.

Chapter 6 EMC

Definition of Terms and EMC Standards

Explains electromagnetic compatibility and discusses EMC standards.

Peripheral EMC Devices Selection

Recommends EMC filters, reactors, and magnetic rings for noise suppression.

Shielded Cable and Cabling Requirements

Covers requirements for shielded cables and proper wiring practices.

Solutions to EMC Interference

Provides solutions for current leakage and common EMC interference problems.

Chapter 7 Selection and Dimensions

Electrical Specifications and Physical Dimensions

Lists technical data and physical dimensions for CS200 models.

Cable Selection and Braking Resistor

Guides on selecting cables, operation panel, and braking resistors.

Chapter 8 Maintenance and Trouble-shooting

AC Drive Maintenance and Storage

Covers routine/periodic maintenance, component replacement, and storage.

Trouble-shooting Common Faults

Explains fault codes, sub-codes, and common fault diagnosis.

Chapter 9 Appendix

Appendix A: Extension I;O Card MD38 IO1

Describes the features and installation of the extension I/O card.

Appendix B: Relay Card Connection

Details connecting a digital output to a relay card.

Appendix C: Revision History

Lists document version history.