Inovance Aonarch MD500L Series - Parameter Table; Group FF: Drive Parameters; Group FP: Function Code Management; Group A5: Control Optimization

- 66 -
Parameter Table
Group FF: drive parameters
Parameter Parameter Name Setting Range Unit Default Commission
FF-00 Factory password 0 to 65535 N.A 0 -
FF-01 Drive code 1 to 537 N.A
Model
dependent
-
FF-02 G/P type selection
1: G type
2: P type
N.A 1 -
FF-03 Drive rated power 0 to 6553.5 N.A
Model
dependent
display
Group FP: function code management
Parameter Parameter Name Setting Range Unit Default Commission
FP-00 User password 0 to 65535 N.A 0 -
FP-01 Parameter initialization
0: No operation
01: Restore factory settings
except motor parameters
02: Clear records
04: Restore user backup
parameters
501: Back up current user
parameters
N.A 0 -
FP-03
Parameter display
selection
7-segment 0 0 N.A 0 -
Modi󶍾ed parameters:
0: No display
1: Display
Customized parameters:
0: No display
1: Display
Group A5: control optimization
Parameter Parameter Name Setting Range Unit Default Commission
A5-06 Undervoltage threshold 60.0 to 140.0 % 130.0 100% is 350V
A5-09
Overvoltage tripping
level
200.0 to 2500.0 V 810 -