Inovance H0U Series Programming Manual

5 Create and download project
21
4
Encryption
Encryption encrypts this function key, and this function key can only
be used when the system password is open (has been set
correctly).
5
Set coil
The action of this function key is the switch value setting.
6
Screen jump
The action of this function key is screen jump.
7
Set register
When this action of the function key used, PLC data register
determines the corresponding switch action.
8
Set to ON
Turn on the designated intermediate relay.
9
Set to OFF
Turn off the designated intermediate relay.
10
Reverse
Set the designated intermediate relay to inverse logic.
11
Instantaneous ON
When the button is pressed, the designated intermediate relay is
turned ON; when the button is popped up, the designated
intermediate relay is turned OFF.
If you select "Screen Jump", the following setting dialog will appear:
In above example, under ‘Function key attribute, set the "Jump to" page number to 2. When ‘Esc’
key is pressed, jumps to page number 2.
Setting registers and register addition and subtraction functions are similar to setting coil
functions.
Click the button drop-down dialog box, and 25 button markers will pop up,
select the button you need.

Inovance H0U Series Specifications

General

Brand	Inovance
Model	H0U Series
Category	Controller
Language	English