5 Create and download project
6
The following contents of this manual mainly introduce the general use of H0U-XP's text (TOD)
programming software HTodEditor, including software installation instructions, quick start,
parameter setting and display, control introduction, page generation, example demonstration, etc.
1.2 Installation of text programming software HTodEditor
1) Introduction to HTodEditor software
HTodEditor software is mainly used for text editing of H0U-XP series PLC (H0U integrated
programmable controller), with text display, key setting, register setting, menu, bar graph, trend
graph production, and alarm list display functions. Based on standard text functions, easy-to-use
functions such as password authority and PLC control are added.
2) Install HTodEditor programming software
▪ Software source
The HTodEditor programming software is independently developed by Inovance. You can ask for
the latest version of the software from the supplier, or download it on the Inovance website:
http://www.inovance.com
Computer configuration requirements (recommended configuration)
▪ CPU: Intel or AMD products with a frequency above 1G
▪ Memory: 512MB or above
▪ Hard disk: at least 500MB free disk space
▪ Display: Support a colour display with a resolution of 1024 x 768 or higher
▪ Ethernet port or USB port: used when uploading and downloading page configuration
programs
▪ Operating system: Windows 7/Windows 8/Windows 10
3) Installation steps
Step 1: Download the software to the computer, click the [setup.exe] file, the screen will
display the installation window as follows, at this time, according to the instructions, click "Next":
Step 2: Select the folder where the software to be installed or choose the default path, and click
"Next":
To Next Page
Loading...
Need help?
General
