5 Create and download project
32
4.9 Menu
This control can display registers in a menu. The user can select the menu options by pressing
the “▲” and “▼” buttons on the display. After selecting the corresponding menu, press the
ENT key to set the register, or jump to the corresponding interface.
When the user selects the "screen jump" function, the operation value corresponding to the menu
name on the right indicates the corresponding jump page number.
When the user selects the menu name by pressing the "▲" "▼" buttons, the system will jump to
the page corresponding to the operating value.
When "Screen Jump" is selected,
the operation value here indicates
the corresponding jump page
number.
When the user selects the menu name through
the "▲" and "▼" buttons, the system will jump
to the corresponding operation value page
To Next Page
Loading...
