Inovance H0U Series - Indicator Light

5 Create and download project
27
4.5 Indicator light
Click the control button to insert the indicator, a rectangular dashed frame appears on the
screen, and follow the mouse to move the moving distance is an integer multiple of 4 pixels, now
press the left mouse button to confirm the position. After confirming, the content "Indicator lamp"
is displayed in the window, and the attribute of the indicator lamp is displayed at the bottom of
the interface:
Coil
number
The type can be selected from four types: M, D, X, and Y. The address range is
limited to 0~8499. But it should be noted that the range of M components is
M0~M3071, M8000~M8499. The address range of X and Y is 0~7, 10~17, if you
choose an invalid address within 0~8499, the programming software can set it but
it has no specific meaning. Note: If the D element is selected, the indicator light is
off when the D element is 0, and the indicator light is on when the D element is not
0.
Display
type
The shape of the indicator light includes square and round shapes.
Positive
logic
When the corresponding register is ON, the indicator light shows solid; when the
corresponding register is OFF, the indicator light shows hollow.
Negative
logic
When the corresponding intermediate register is ON, the indicator light shows
hollow; when the corresponding intermediate register is OFF, the indicator light
shows solid.