Inovance MD021 - F2-02 to F2-04 PID Tuning Parameters

MD021 Plastic Wire Drawing Machine User Manual
frequency, see the description of Group F1 function codes.
3: PID
The frequency is controlled using PID. The PID parameters in Group
F2 need to be set. The running frequency of the inverter is the value
processed using PID. For the meaning of the PID setting source, PID
setting and feedback range, and PID feedback, see Group F2 function
codes.
4: Via communication
The frequency is given by the host computer. For details on the
communication protocol, see "Modbus Serial Communication
Protocol for the Plastic Wire Drawing Machine."
Function
Code
Name
Range
Default
F0-02
Maximum
frequency
50.00 Hz to 200.00
Hz
100.00 Hz
This parameter specifies the maximum output frequency of the
inverter.
Function
Code
Name
Range
Default
F0-03
Preset
frequency
0.00 Hz to
maximum frequency
(F0-02)
50.00 Hz