Chapter 2 Product Information
-13-
Item Specifications
MF.K Key
Programmable key: Select the command channel
switching/forward and reverse rotations/jog operation.
running command
channel
Two kinds of channels: Operation panel reference,
control terminal reference
Frequency source
Multiple frequency sources: digital reference, analog
voltage reference, analog current reference and pulse
reference. Switching among multiple modes is
available.
Input
output
Auxiliary Frequency
source
It can implement fine tuning and synthesis of auxiliary
frequency.
Input terminal
There are four digital input terminals, one of which
can be used as high-speed pulse input.
There are two analog input terminals, one of which
can be used only as voltage input, while the other can
be used as voltage or current input.
Characteristics
Output terminal
One digital output terminal
One relay output terminal
One analog output terminal; outputs of setting
frequency and output frequency are enabled.
Display and
Keyboard
Operation
LED display
It is able to display multiple parameters, such as
setting frequency, output frequency, output voltage
and output current.
protection
function
It can implement power-on motor short-circuit
detection, input/output phase loss protection, over
current protection, over voltage protection, under
voltage protection, over heat protection and overload
protection.
Using Place
Indoor, and being free from direct sunshine, dust,
corrosive gas, combustible gas, oil smoke, vapor, drip
or salt.
Environment Protection class IP20
efesotomasyon.com
To Next Page
Loading...
