Technical Data
‑143‑
Single-phase 200 V to 240 V
Table 7–12 Electrical specifications (single‑phase 200 V to 240 V) (T2 models)
Item
Specifications
Model: MD500‑2Sxxxxx‑PLUS 0.4GB 0.7GB 1.5GB 2.2GB
Structure T2
Output
Motor capacity (kW)
0.4 0.75 1.5 2.2
Rated output
current (A)
2.3 4.0 7.0 9.6
Output voltage Three‑phase 0 V to 240 V (subject to input voltage)
Max. output
frequency
599 Hz (editable through a parameter)
Carrier frequency 0.8 kHz to 8.0 kHz (automatically adjusted according to the load characteristics)
Overload capacity
150% for 60s with rated current
Input
Rated input current
(A)
5.4 8.2 14 20.0
Rated voltage/
frequency
Single‑phase 200 VAC to 240 VAC, 50/60 Hz
Voltage range
Allowable fluctuation: –15% to +10% (170 VAC to 264 VAC)
Frequency range
Allowable fluctuation: ±5% (47.5 Hz to 63 Hz)
Power capacity
(kVA)
1.4 2.2 3.7 6.0
Thermal
design
Thermal design
power (kW)
0.043 0.065 0.097 0.121
Air flow (CFM)
20 20 20 20
Overvoltage category
OVC III
Pollution degree
PD2
IP rating
IP20 (open type, for IEC products)
Type 1 (enclosed type, for UL products)
To Next Page
Loading...
