Components
‑27‑
No. Name No. Name No. Name
①
Protective
cover for
positive and
negative
terminals
②
Positive and
negative
terminals of
the DC bus
③
Equipment bar code
It allows you to check the product
code and model.
④
Nameplate
⑤
Encoder
expansion
card fixing
base
⑥
Cable tray and fixing base for the
control board ground cable
Note: Connect the control board
ground cable to the ground copper
bar only when the system is reliably
grounded; otherwise, connect it to
the fixing base.
⑦
Grounding
copper
busbar
It is used to
ground the
PG card and
control
board.
⑧
Base for fixing
the expansion
card
⑨
Enclosure
⑩
Main circuit
power supply
indicator
Do not
disassemble
the machine
or perform
wiring when
this indicator
is ON.
⑪
Grounding
screws for
safety
capacitor and
voltage
dependent
resistor
⑫
Main circuit input terminals
⑬
Bottom
hoisting
position
⑭
Top hoisting
position (lifting
lug)
⑮
Operating panel
⑯
External
operating
panel
interface
⑰
Control circuit
terminal
⑱
Cable tie
⑲
Wiring
description
⑳
Handle
㉑
Fan box
㉒
Main circuit
output
terminal
㉓
Grounding
terminal
㉔
Caster
㉕
Logo
㉖
Upper front
cover
㉗
Mark
To Next Page
Loading...
