Inovance MD520 Series - 5.2 Mounting Accessories; 5.2.1 Through-Hole Mounting Bracket

Options
‑58‑
Name Model Order No.
Supported AC
Drive Model
Description
Cables Main circuit
cable
Lugs manufactured by Suzhou Yuanli are
recommended. For details of recommended lugs, see
"
5.3.1 Main Circuit Cables " on page 73 .
It is recommended that the input
and output main circuit cables use
symmetrical shielded cables.
Compared with four‑conductor
cables, symmetrical shielded
cables can reduce electromagnetic
radiation in the whole transmission
system. It is recommended that
power cables also use symmetrical
shielded cables.
Control circuit
cables
All control circuit cables must be shielded cables. Use a separate shielded cable for each type
of analog signal. It is recommended that digital signal cables use shielded twisted pair (STP)
cables.
External LED
operating panel
MDKE‑10 01040182 All models It supports parameter display and
modification.
External LCD
operating
panel
SOP‑20‑810 01040028 All models It supports parameter copy and
download, and supports English
and Chinese.
SOP‑20‑810
mounting base
CP600–BASE1 01040022 All models It is used to install the SOP‑20‑810
to the cabinet door.
MDKE‑10
mounting base
MD580‑AZJ1 01040202 All models It is used to install the MDKE‑10 to
the cabinet door.
Extension
cable
MDCAB 01013008 All models It is a standard eight‑conductor,
three‑meter network cable that can
be used to connect the LED
operating panel MDKE‑10 and LCD
operating panel SOP‑20‑810.
MDCAB‑1.5 15048471 All models 1.5‑Meter cable for connecting the
external operating panel
Note
For details on models and specifications of other peripheral electrical components, such as
input reactors, EMC filters, output reactors, and fuses, see the section of peripheral electri‑
cal components.
5.2 Mounting Accessories
5.2.1 Through-Hole Mounting Bracket
The through‑hole mounting bracket is an option. Purchase a proper model based on
actual needs.