Components
‑29‑
No. Name No. Name No. Name
①
Protective cover
for positive and
negative
terminals
②
Positive and
negative
terminals of
the DC bus
③
Equipment bar code
It allows you to check the
product code and model.
④
Nameplate
⑤
Encoder
expansion card
fixing base
⑥
Cable tray and fixing base for
the control board ground cable
Note: Connect the control
board ground cable to the
ground copper bar only when
the system is reliably grounded;
otherwise, connect it to the
fixing base.
⑦
Grounding copper
busbar
It is used to
ground the PG
card and control
board.
⑧
Base for fixing
the expansion
card
⑨
Enclosure
⑩
Main circuit
power supply
indicator
Do not
disassemble the
machine or
perform wiring
when this
indicator is ON.
⑪
Grounding
screws for
safety
capacitor and
voltage
dependent
resistor
⑫
Main circuit input terminal
⑬
Bottom hoisting
position
⑭
Main circuit
output
terminal
⑮
Grounding terminal
⑯
Top hoisting
position (lifting
lug)
⑰
Operating
panel
⑱
External operating panel
interface
⑲
Control circuit
terminal
⑳
Cable tie
㉑
Wiring description
㉒
Fan box
㉓
AC output
reactor
㉔
Casters
㉕
Left cover of the
base
㉖
Logo
㉗
Upper front cover
㉘
Mark
㉙
Front lower
cover
‑ ‑
To Next Page
Loading...
