Inovance MD520 Series - Introduction and Installation

Options
‑74‑
coaxial cooper braids to suppress radio frequency interference. To enhance the
shielding performance and conductivity, the braided density of the shield must be
greater than 90%.
Figure 5‑14 Recommended power cable
Recommended cable
Table 5–3 Cable selection (three‑phase 380 V to 480 V)
Str
uc
tur
e
Drive Model
Rated
Input
Current
(A)
R/S/T, U/V/W
Grounding Cable
Screw
Tightening
Torque
(N·m)
(lb.in)
Recommend
ed Cable
(mm
2
)
<1>
Recom
mended
Cable Lug
Recommend
ed Cable
(mm
2
)
<1>
Recom
mended
Cable Lug
T1 MD520‑
4T0.4B(S)
1.8
3 x 0.75 TNR0.75‑4 0.75 TNR0.75‐4 M4
1.2
(10.6)
MD520‑
4T0.7B(S)
2.4
3 x 0.75 TNR0.75‑4 0.75 TNR0.75‐4 M4
1.2
(10.6)
MD520‑
4T1.1B(S)
3.7
3 x 0.75 TNR0.75‑4 0.75 TNR0.75‐4 M4
1.2
(10.6)
MD520‑
4T1.5B(S)
4.6
3 x 0.75 TNR0.75‑4 0.75 TNR0.75‐4 M4
1.2
(10.6)
MD520‑
4T2.2B(S)
6.3
3 x 0.75 TNR0.75‑4 0.75 TNR0.75‐4 M4
1.2
(10.6)
MD520‑
4T3.0B(S)
9.0 3 x 1 TNR1.25‐4 1 TNR1.25‐4 M4 1.2
(10.6)
T2 MD520‑
4T3.7B(S)
11.4 3 x 1.5 TNR1.25‐4 1.5 TNR1.25‐4 M4 1.2
(10.6)
MD520‑
4T5.5B(S)
16.7 3 x 2.5 TNR2‑4 2.5 TNR2‑4 M4 1.2
(10.6)
T3 MD520‑
4T7.5B(S)
21.9 3 x 4 TNR3.5‐5 4 TNR3.5‐5 M5 2.8
(24.8)
MD520‑
4T11B(S)
32.2 3 x 6 TNR5.5‐5 6 TNR5.5‐5 M5 2.8
(24.8)
T4 MD520‑
4T15B(S)
41.3 3 x 10 GTNR8‑5 10 GTNR8‑5 M5 2.8
(24.8)