Inovance SV670P Series - Page 56

Terminals
‑55‑
Terminal descriptions
V
U
Figure 4‑4 Wiring between the servo drive and terminal‑type motor
Table 4–3 Description of the power cable connector (motor side) for terminal‑type motors
Flange Size
[1]
Outline Drawing of the
Connector
Terminal Pin Layout
Pin No.
Signal Name
Color
Terminal‑
type:
40
60
80
Black 6‑pin connector
1 PE
Yellow/
Green
2 W
Red
3 V
Black
4 U
White
5
Brake (polarity
insensitive)
Brown
6
Blue
Note
● [1] The flange size refers to the width of the mounting flange.
● Power cable colors are subject to the actual product. All cable colors mentioned in
this guide refer to Inovance cable colors.