Terminals
‑86‑
4.5 Description of Communication Terminal (CN5)
Terminal Layout
Table 4–22 Pin Description of Communication Terminals (CN5)
Pin No.
Description Description
A1
B1
GND
Ground
A4
B4
VBUS
USB power supply
A5
B5
‑ ‑
A6
B6
DP
Differential data transmission
A7
B7
DN
Differential data transmission
A8
B8
‑ ‑
A9
B9
VBUS
USB power supply
A12
B12
GND
Ground
Terminal descriptions
This terminal is a commissioning port connected with the PC. The communication
cable must be of fast‑charging Type‑C with a magnetic ring. It must be equipped with
a grounding wire, aluminum foil and metal shielding layer. Its length can be up to 3
m.
Figure 4‑23 Recommended cables
To Next Page
Loading...
