Insignia NS-ODL3 - STEP 6: Insert Wooden Dowels and Cam-Lock Screws into the Left and Right Hutch Panels

12
www.insigniaproducts.com
STEP 6: Insert wooden dowels and cam-lock screws into the left and right hutch panels
You n e ed:
1 Insert two wooden dowels (A) into the edges of the left hutch panel (5) and right hutch panel (6).
2 Screw eight cam-lock screws (B) into the left and right hutch panels with a Phillips screwdriver. Make sure that the
cam-lock screws are straight and flush with each panel.
T
B
Cam-lock screws (8)
Phillips screwdriver
5
Left hutch panel
6
Right hutch panel
A
Wooden dowels (2)