21
L-Shaped Computer Desk
www.insigniaproducts.com
STEP 15: Secure the main leg assembly and side leg assembly
You n e ed:
1 Align the end of the side front support bar (15) with the hole on the main back support bar (11), then secure with a
M6 × 50 mm bolt (L) and a hex wrench (M).
2 Have someone help you lift the leg assembly into an upright position.
Note: To make assembly easier, do not lock the bolts tightly until you have assembled all other parts.
L
M6 × 50 mm bolt
M
Hex wrench
To Next Page
Loading...
