22 | support@instantpot.com | 1-800-828-7280
Control panel
Settings
Setting Description
Turn sound
on or off.
When in standby, touch and hold the sound icon for 2 seconds to
toggle sounds on and off.
Audible safety and error message alerts cannot be turned off.
Change
displayed
temperature
(°C and °F).
When in standby, touch and hold the thermometer icon for
2 seconds to toggle between displaying °C and °F.
Adjust and
save custom
cooking
times and
temperatures.
Once a Smart Program is selected, changes to the cooking time,
temperature and pressure level are saved once the Smart Program
begins.
Delay the start
of cooking.
Default time Time range
6 hours (06:00)
10 minutes to 24 hours
(00:10 to 24:00)
01 Select and set up an applicable Smart Program.
02 When you're ready, touch Delay Start.
The hours field ashes.
03 Turn the dial to adjust the hours field as needed.
04 Touch the minutes field to toggle to it.
Turn the dial to adjust the minutes field as needed.
05 Press Start to begin the delay countdown.
Delay Start cannot be used with Sauté, Yogurt or Sous Vide.
Reset an
individual
Smart
Program.
When in standby, touch and hold the Smart Program button you
want to reset for 3 seconds .
The Smart Program’s cooking time, pressure level and/or
temperature are restored to the factory default setting.
Reset all Smart
Programs.
When in standby, touch and hold Cancel until the multicooker beeps.
All Smart Program cooking times, pressure levels and/or
temperatures are restored to factory default settings.
To Next Page
Loading...
Need help?
General
