46 | support@instantpot.com | 1-800-828-7280
Care, cleaning and storage
Removing and installing parts
Silicone sealing ring
Remove the sealing ring
Grip the edge of the silicone and pull the
sealing ring out from behind the circular
stainless-steel sealing ring rack.
With the sealing ring removed, check
the ring rack to make sure it is secured,
centered, and an even height all the way
around the lid. Do not attempt to repair a
deformed ring rack.
Instant Tip: The sealing ring is easiest
to remove and install when it is wet
and soapy.
Install the sealing ring
Place the sealing ring over the sealing ring
rack and rmly press it into place. Make
sure there’s no puckering.
It should be snug behind sealing ring
rack. It can wiggle a bit but shouldn’t
fall out when you turn over the lid.
To Next Page
Loading...
Need help?
General
