11
Product Support: www.instron.com
Chapter 1
Introduction
• System Description and Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
• System Safety and Information Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
• Product Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
• Product Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
These instructions include the following information:
• system specifications that are required for installation of your testing system, for
example required environmental conditions, system weights and dimensions
• transporting your system to its final location, including instructions for lifting and
handling
• system performance specifications for this frame model
Refer to the Operator’s Guide for instructions on connecting system components,
system configuration, running tests, and performing routine maintenance of the system.
To Next Page
Loading...
Need help?
General
