47
Operator Protection Overview
Product Support: www.instron.com
• crosshead jog speed reduced to a maximum of 600 mm/min, and can be set lower
if your risk assessment requires it
• grip closing pressure reduced to a default of 15 psi, and can be set lower if your risk
assessment requires it.
Operator Protection lets an Administrator configure the testing system to be consistent
with the risk assessment for that system.
Access to the controls for Operator Protection is password protected. If you have
Administrator rights you can modify Operator Protection in the Admin tab in Bluehill
®
.
To Next Page
Loading...
Need help?
General
