Chapter: Lifting and handling
60 M10-17416-EN
Crush hazard - Ensure that all persons in the immediate area are standing away from
the frame during lifting.
Do not lift the frame more than 8 cm (3 in) off the floor.
4. Slowly and carefully lift the frame off the floor.
5. Move the frame to its operating location.
6. Slowly lower the frame to the floor.
7. Before placing the frame in its operating location, you must remove the shipping skid.
Follow the instructions described under “Crosshead method” on page 57 to
remove the shipping skid and position the frame.
When the frame is in its operating location, you can proceed with the installation
process.
To Next Page
Loading...
