EasyManua.ls Logo

Instron AVE2 - Dimensions and Weight; Software Compatibility

Instron AVE2
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter: Specifications
22 M16-16905-EN
Dimensions and weight
Dimensions of the AVE or SVE mounted on various frames are shown in Figure 4,
Figure 10, Figure 13, Figure 17, Figure 19 and Figure 20. All dimensions are in
mm.
Weights are as follows:
AVE2 including standard light bar weighs 3.4 kg (7.5 lb)
SVE2 including standard light bar weighs 3.1 kg (6.8 lb)
Mounting post with cables weighs 6.2 kg (13.6 lb)
Software compatibility
Table 7 on page 22 lists the versions of Bluehill
®
that are compatible with the AVE2
and the SVE2 installed on various electromechanical and static hydraulic testing
systems.
If you are using an 8800 or ElectroPuls system for static testing, the AVE2 is compatible
with the following versions of software:
Console V8.9 or later
Firmware V12.14 or later
Bluehill
®
V3.63 or later
If you are using an 8800 or ElectroPuls system for dynamic testing, the AVE2 is
compatible with the following versions of software:
Table 7. Electromechanical and Static Hydraulic Testing Systems
Testing system Compatible software
5900 series, 3300 series, 5500 series,
LX static hydraulic
Bluehill
®
V3.62 or later
3400 series Bluehill
®
V4.11 or later
6800 series Bluehill
®
V4.18 or later
Any compatible system using the AverEdge32™ for
transverse measurement (AVE2 only)
Bluehill
®
V4.19 or later

Table of Contents

Related product manuals