Integra DTR-20.7 - Page 76

Advanced Settings (Setup Menu)
En-44
Setting Item Default Value Setting Details
PC Zone2 Set the 12V trigger output setting to each
input�
"Off": No output
"Main": Output when "PC" is selected as input
for main room�
"Zone2": Output when "PC" is selected as
input for ZONE2�
"Main/Zone2": Output when "PC" is selected
as input for main room or ZONE2�
GAME Zone2 Set the 12V trigger output setting to each
input�
"Off": No output
"Main": Output when "GAME" is selected as
input for main room�
"Zone2": Output when "GAME" is selected as
input for ZONE2�
"Main/Zone2": Output when "GAME" is
selected as input for main room or ZONE2�
AUX Zone2 Set the 12V trigger output setting to each
input�
"Off": No output
"Main": Output when "AUX" is selected as
input for main room�
"Zone2": Output when "AUX" is selected as
input for ZONE2�
"Main/Zone2": Output when "AUX" is selected
as input for main room or ZONE2�
CD Zone2 Set the 12V trigger output setting to each
input�
"Off": No output
"Main": Output when "CD" is selected as input
for main room�
"Zone2": Output when "CD" is selected as
input for ZONE2�
"Main/Zone2": Output when "CD" is selected
as input for main room or ZONE2�
Setting Item Default Value Setting Details
TV Zone2 Set the 12V trigger output setting to each
input�
"Off": No output
"Main": Output when "TV" is selected as input
for main room�
"Zone2": Output when "TV" is selected as
input for ZONE2�
"Main/Zone2": Output when "TV" is selected
as input for main room or ZONE2�
TUNER Zone2 Set the 12V trigger output setting to each
input�
"Off": No output
"Main": Output when "TUNER" is selected as
input for main room�
"Zone2": Output when "TUNER" is selected
as input for ZONE2�
"Main/Zone2": Output when "TUNER" is
selected as input for main room or ZONE2�
NET Zone2 Set the 12V trigger output setting to each
input�
"Off": No output
"Main": Output when "NET" is selected as
input for main room�
"Zone2": Output when "NET" is selected as
input for ZONE2�
"Main/Zone2": Output when "NET" is selected
as input for main room or ZONE2�
BLUETOOTH Zone2 Set the 12V trigger output setting to each
input�
"Off": No output
"Main": Output when "BLUETOOTH" is
selected as input for main room�
"Zone2": Output when "BLUETOOTH" is
selected as input for ZONE2�
"Main/Zone2": Output when "BLUETOOTH" is
selected as input for main room or ZONE2�