98
Advanced Setup—Continued
Theater-Dimensional
Listening Angle Wide: Select if the listening angle is greater than 30 degrees (default).
Narrow: Select if the listening angle is less than 30 degrees.
With this setting, you can optimize the Theater-Dimen-
sional listening mode by specifying the angle of the front
left and right speakers relative to the listening position.
LFE Level
With these settings, you can set the level of the LFE (Low Frequency Effects) channel individually for Dolby Digital,
DTS, multichannel PCM, Dolby TrueHD, DTS-HD Master Audio, and DSD sources.
If you find that low-frequency effects are too loud when using one of these sources, change the setting to –20 dB or
–Q dB.
Dolby Digital
*1
, DTS
*2
, Multich PCM
*3
, Dolby TrueHD
*4
, DTS-HD Master Audio
*5
, DSD
*6
The level can be set to –Q dB, –20 dB, –10 dB, or 0 dB (default).
Notes:
*1 Sets the level of the LFE channel for Dolby Digital and Dolby Digital Plus sources.
*2 Sets the level of the LFE channel for DTS and DTS-HD High Resolution sources.
*3 Sets the level of the LFE channel for multichannel PCM sources. (Multichannel PCM is input via HDMI.)
*4 Sets the level of the LFE channel for Dolby TrueHD sources.
*5 Sets the level of the LFE channel for DTS-HD Master Audio sources.
*6 Sets the level of the LFE channel for DSD (Super Audio CD) sources.
Front left speaker Front right speaker
Listening angle: 30°
To Next Page
Loading...
Need help?
General
