41
First Time Setup
This section explains the settings that you need to make before using the AV receiver for the very first time. The onscreen
setup menus appear only on a TV that is connected to the HDMI OUT. There’s no need to change this setting if your
TV is connected to the composite video or S-video MONITOR OUT, or the COMPONENT VIDEO MONITOR OUT.
This setting determines the language used for the
onscreen setup menus. You can select: English, German,
French, Spanish, Italian, Dutch, Swedish, or Chinese.
Note:
This procedure can also be performed on the AV receiver
by using its [Setup] button, arrow buttons, and [Enter]
button.
Selecting the Language used for the
onscreen setup menus
1
Press the [Receiver] button, fol-
lowed by the [Setup] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [q]/[w] but-
tons to select “6. Miscella-
neous”, and then press [Enter].
The “Miscellaneous” menu appears.
Setup
Receiver
qwer
Enter
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
Menu
6. Miscellaneous
1. Volume Setup
2. OSD Setup
3. 12V Trigger A Setup
4. 12V Trigger B Setup
5. 12V Trigger C Setup
3
Use the Up and Down [q]/[w] but-
tons to select “2. OSD Setup”,
and then press [Enter].
The “OSD Setup” menu appears.
(Australian models)
4
Use the Up and Down [q]/[w] but-
tons to select “Language”, and
then use the Left and Right [e]/
[r] buttons to select:
English, Deutsch, Français, Español,
Italiano, Nederlands, Svenska, 中文
5
Press the [Setup] button.
The setup menu closes.
6–2. OSD Setup
Immediate Display
Display Position
TV Format
Language
On
Bottom
Auto
English
To Next Page
Loading...
Need help?
General
