Integra DTR-80.2 User Manual

6
En
Features
Amplifier
(DTR-80.2)
• 145 Watts/Channel @ 8 ohms (FTC)
• 220 Watts/Channel @ 6 ohms (IEC)
• 280 Watts/Channel @ 6 ohms (JEITA)
(DTR-70.2)
• 140 Watts/Channel @ 8 ohms (FTC)
• 200 Watts/Channel @ 6 ohms (IEC)
• 250 Watts/Channel @ 6 ohms (JEITA)
• WRAT–Wide Range Amplifier Technology
(5 Hz to 100 kHz bandwidth)
• Linear Optimum Gain Volume Circuitry
• 3 Stage Inverted Darlington Amplifier Design
• H.C.P.S.(High Current Power Supply) Massive High
Power Transformer
• (DTR-80.2) Toroidal transformer
Processing
• THX Ultra2 Plus
*1
Certified
• HQV-Reon-VX Video Processing with 1080p Video
Upscaling of All Video Sources via HDMI
• HDMI (Ver.1.4a with Audio Return Channel, 3D), Deep
Color, x.v.Color
*2
, Lip Sync, DTS
*3
-HD Master Audio,
DTS-HD High Resolution Audio, Dolby TrueHD
*4
,
Dolby Digital Plus, DSD and Multi-CH PCM
• Dolby Pro Logic IIz
*4
– New Surround Format
(front-high)
• Audyssey DSX™
*5
for New Surround Channels
(front-wide/front-high)
• 4 DSP Modes for Gaming; Rock/Sports/Action/RPG
• Non-Scaling Configuration
•A-Form Listening Mode Memory
• Direct Mode
• Music Optimizer
*6
for Compressed Digital Music files
• (DTR-80.2) Burr-Brown 192 kHz/32-Bit DACs
• (DTR-70.2) Burr-Brown 192 kHz/24-Bit DACs
• Powerful and Highly Accurate 32-bit Processing DSP
• Jitter Cleaning Circuit Technology
• Neural Surround Decoding
*7
• DSD Direct for Super Audio CD
Connections
•8HDMI
*8
Inputs (1 on front panel) and 2 Outputs
• Integra/Onkyo p for System Control
• (DTR-80.2) 7 Digital Inputs (4 Optical/3 Coaxial)
• (DTR-70.2) 6 Digital Inputs (3 Optical/3 Coaxial)
• Component Video Switching (3 Inputs/1 Output)
• Universal Port for the Optional Dock for iPod
*9
/HD
Radio™
*10
tuner module (North American mod-
els)/DAB+ tuner module (Australian models)
• 2 Independent Subwoofer Pre Outs
• Banana Plug-Compatible Speaker Posts
• Powered Zone 2/3/4
• Internet Radio
*
Connectivity (SIRIUS Internet
Radio
*11
/vTuner/Pandora/Rhapsody
*12
/Slacker/Medi-
afly/Napster)
*
Services available may vary depending on the region.
• Network Capability for Streaming Audio Files
• Bi-Amping and BTL Capability
• (DTR-80.2) 2 USB Inputs
*
(Front/Rear) for Memory
Devices and iPod
®
/iPhone
®
models (Enables Display of
Album Artwork)
*
Only front-panel USB input is compatible with iPhone/iPod.
• (DTR-70.2) Front-Panel USB Input for Memory
Devices and iPod
®
/iPhone
®
models (Enables Display of
Album Artwork)
• Analog RGB Video Input (D-sub 15) for PC
Miscellaneous
• (North American models) 40 SIRIUS
*11
/FM/AM Pre-
sets
• (Australian models) 40 FM/AM Presets
•Dolby Volume
*4
• Audyssey MultEQ
®
XT32
*5
to Correct Room Acoustic
Problems
• Audyssey Dynamic EQ
®*5
for Loudness Correction
• Audyssey Dynamic Volume
®*5
to Maintain Optimal
Listening Level and Dynamic Range
• Crossover Adjustment
(40/45/50/55/60/70/80/90/100/110/120/130/150/200 Hz)
• A/V Sync Control Function (up to 250 ms)
• Auto Power-down Function
• Bi-Directional Preprogrammed (with onscreen display
setup) RI-Compatible Learning Remote with 4 Activities
and Mode-Key LEDs
• ISF (Imaging Science Foundation) Video Calibration
•VLSC
*13
(Vector Linear Shaping Circuitry) for All
Channels

Integra DTR-80.2 Specifications

General

Brand	Integra
Model	DTR-80.2
Category	Receiver
Language	English