Intek KT-355EE - Before Using the Unit; Battery Precautions and Compatibility; Unit Handling and Power Requirements

Before USing fhe Unit (Observe the Following Precautions)
n Never tauch the unit’s cores or
trimmers
They are already adjusted
for Optimum Performance
The unit will not operate
on a 24 V power
suPPlY-
n The unit’s operatlng
voltage range 1s 6 0
. 160V
Never connect the
unit to an extemal
power supply out-
side of this range
Doing so could Cause
- 16V
unit
Batteries
H Make sure the j + ; and / ) ends of the battertes are ori-
ented correc!ly
n Never use new and old batteries together
9 Never expose old batteries to an open flame
Suitable batteries
n SUM-3 magnestum batterles
H AlkalIne batteries
E Nickel-cadmium batterles
(Same types are not compatible 1
2