Intel 8XC251SA - Page 332

8XC251SA, SB, SP, SQ USER’S MANUAL
A-80
Hex Code in: Binary Mode = [Encoding]
Source Mode = [Encoding]
Operation: MOV
(A) ← #data
MOV dir8,#data
Binary Mode Source Mode
Bytes: 33
States: 3† 3†
†If this instruction addresses a port (P
x , x = 0–3), add 1 state.
Hex Code in: Binary Mode = [Encoding]
Source Mode = [Encoding]
Operation: MOV
(dir8) ← #data
MOV @Ri,#data
Binary Mode Source Mode
Bytes: 23
States: 34
Hex Code in: Binary Mode = [Encoding]
Source Mode = [A5][Encoding]
Operation: MOV
((Ri)) ← #data
MOV Rn,#data
Binary Mode Source Mode
Bytes: 23
States: 12
Hex Code in: Binary Mode = [Encoding]
Source Mode = [A5][Encoding]
Operation: MOV
(Rn) ← #data
MOV dir8,dir8
Binary Mode Source Mode
Bytes: 33
States: 33
[Encoding] 0 1 1 1 0 1 0 1 direct addr immed. data
[Encoding] 0 1 1 1 0 1 1 i immed. data
[Encoding] 0 1 1 1 1 r r r r immed. data